Mellanox製10/25GbEネットワークインターフェースカード
- 仕様
-
モデル MCX4111A-XCAT MCX4121A-XCAT MCX4111A-ACAT MCX4121A-ACAT Description ConnectX-4 Lx EN network interface card, 10GbE single-port SFP28, PCIe3.0 x8, tall bracket ConnectX-4 Lx EN network interface card, 10GbE dual-port SFP28, PCIe3.0 x8, tall bracket ConnectX-4 Lx EN network interface card, 25GbE single-port SFP28, PCIe3.0 x8, tall bracket ConnectX-4 Lx EN network interface card, 25GbE dual-port SFP28, PCIe3.0 x8, tall bracket Ethernet – 50GbE / 40GbE / 25GbE / 10GbE / 1GbE
– IEEE 802.3bj, 802.3bm 100 Gigabit Ethernet
– 25G Ethernet Consortium 25, 50 Gigabit Ethernet
– IEEE 802.3ba 40 Gigabit Ethernet
– IEEE 802.3ae 10 Gigabit Ethernet
– IEEE 802.3az Energy Efficient Ethernet
– IEEE 802.3ap based auto-negotiation and KR startup
– Proprietary Ethernet protocols(20/40GBASE-R2, 50GBASE-R4)
– EEE 802.3ad, 802.1AX Link Aggregation
– IEEE 802.1Q, 802.1P VLAN tags and priority
– EEE 802.1Qaz (ETS)
– IEEE 802.1Qbb (PFC)
– IEEE 802.1Qbg
– IEEE 1588v2
– Jumbo frame support (9.6KB)Enhanced Features – Hardware-based reliable transport
– Collective operations offloads
– Vector collective operations offloads
– PeerDirect RDMA (aka GPUDirect® communication acceleration
– 64/66 encoding
– Extended Reliable Connected transport (XRC)
– Dynamically Connected transport(DCT)
– Enhanced Atomic operations
– Advanced memory mapping support,allowing user mode registration and remapping of memory (UMR)
– On demand paging (ODP) –registration free RDMA memory accessQuality of Service – 802.3X Flow Control
– WRED, Fast ECN & PFC
– 802.1Qbb Priority Flow Control
– 802.1Qaz ETS
– DCBX – App TLV support
– Advanced QoS – Qualification,Rewrite, Policers – 802.1AB
– Shared buffer managementCPU Offloads – RDMA over Converged Ethernet(RoCE)
– TCP/UDP/IP stateless offload
– LSO, LRO, checksum offload
– RSS (can be done on encapsulated
packet), TSS, VLAN insertion/stripping, Receive flow steering
– Intelligent interrupt coalescenceStorage Offloads – RAID offload - erasure coding (ReedSolomon) offload Overlay Networks – Stateless offloads for overlay networks and tunneling protocols
– Hardware offload of encapsulation and decapsulation of NVGRE and VXLAN overlay networksHardware-Based I/O Virtualization – Single Root IOV
– Multi-function per port
– Address translation and protection
– Multiple queues per virtual machine
– Enhanced QoS for vNICs
– VMware NetQueue supportVirtualization – SR-IOV: Up to 256 Virtual Functions
– SR-IOV: Up to 16 Physical Functions per port
– Virtualization hierarchies (e.g. NPAR)
• Virtualizing Physical Functions on a physical port
• SR-IOV on every Physical Functio
n – 1K ingress and egress QoS levels
– Guaranteed QoS for VMsProtocol Support – OpenMPI, IBM PE, OSU MPI(MVAPICH/2), Intel MPI
– Platform MPI, UPC, Open SHMEM
– TCP/UDP, MPLS, VxLAN, NVGRE, GENEVE
– iSER, NFS RDMA, SMB Direct
– uDAPLManagement and Control Interfaces – NC-SI over MCTP over SMBus
and NC-SI over MCTP over PCIe - Baseboard Management Controller interface
– SDN management interface for managing the eSwitch
– I2C interface for device control and configuration
– General Purpose I/O pins
– SPI interface to Flash
– JTAG IEEE 1149.1 and IEEE 1149.6Remote Boot – Remote boot over Ethernet
– Remote boot over iSCSI
– PXE and UEFIDimensions w/o Bracket 14.2cm x 6.9cm(Low Profile) - ※This section describes hardware features and capabilities. Please refer to the driver and firmware release notes for feature availability
- 価格表
-
型番 仕様 ポート数 標準価格 MCX4111A-XCAT ConnectX®-4 Lx EN network interface card, 10GbE single-port SFP28, PCIe3.0 x8, tall bracket 1 オープン MCX4121A-XCAT ConnectX®-4 Lx EN network interface card, 10GbE dual-port SFP28, PCIe3.0 x8, tall bracket 2 オープン MCX4111A-ACAT ConnectX®-4 Lx EN network interface card, 25GbE single-port SFP28, PCIe3.0 x8, tall bracket 1 オープン MCX4121A-ACAT ConnectX®-4 Lx EN network interface card, 25GbE dual-port SFP28, PCIe3.0 x8, tall bracket 2 オープン
- この製品の保証内容
-
- RoHS
- 保証
1年
情報がありません